Conserte seus objetos Comunidade Loja

iPhone X 听筒+前传感器组件的替换

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 2 guias que incluem este passo.

Voltar para o guia
Inglês
Chinês
Passo 9
iPhone X Earpiece Speaker and Front Sensor Assembly Replacement: passo 0, imagem 1 %32 iPhone X Earpiece Speaker and Front Sensor Assembly Replacement: passo 0, imagem 2 %32 iPhone X Earpiece Speaker and Front Sensor Assembly Replacement: passo 0, imagem 3 %32

  • If you successfully removed the entire ambient light sensor, as shown in the first photo, continue to the next step below.

  • If the white diffuser strip detached and remains embedded in the display, as shown in the second photo, you will need to carefully lever it out along the top edge using a thin blade or pry tool. Re-applying heat first may make this task a bit easier.

  • During reassembly, install the diffuser into the display first, making sure it faces the right direction (the front-facing side is shown in the first image, and the rear-facing side is shown in the third).

  • Then, set the ambient light sensor on top of the diffuser. You will need to hold the sensor in position while installing the screws securing the earpiece/sensor assembly. Once the screws are tightened, the sensor will stay in place and work normally.

如果您成功的移除了整个环境光感应器（如图一所示），请继续下一步。

如果传感器上的白色柔光条脱落并残留在屏幕上（如图二所示），您需要使用一个薄的刀片或撬棒从屏幕的上缘小心地将其撬出。提前重新加热可能会使其更容易操作。

重新组装的过程中，请先将柔光条安装到屏幕上，确保其面对正确的方向（朝前的一面如图一所示，朝后的一面如图三所示）。

然后将环境光感应器安装到柔光条上。当您安装固定听筒+传感器组的螺丝时您需要保持住传感器正确的位置。当螺丝拧紧时，传感器就会固定到正确的位置并能正常工作。

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.