Traduzindo o passo 2
Passo 2
Removing Covers
-
Remove top cover screws (3) using a #6 flat head screw driver on the chainsaw T-wrench.
-
Loosen the 1/4" nuts holding the bar cover in place using the chainsaw T-wrench.
-
Turn the chain tension adjustment screw two turns counter clockwise.
-
Remove the nuts holding the bar cover in place, and then remove the bar.
-
Remove fly wheel cover using a 5/32" Allen wrench.
Suas contribuições são licenciadas pela licença de código aberto Creative Commons.