Conserte seus objetos Comunidade Loja

ionvac SmartClean V2 Side Brush Replacement

Introdução

This guide will show you how to replace the side brushes on your ionvac SmartClean V2. While both the main rolling brush and side spinning brushes sweep all dirt into the dustbin, they are replaced differently. Unlike the main brush, side brush replacements are included in your ionvac SmartClean V2 box.

This is a quick and easy replacement, and you will not need any tools to complete it. Remember to remove and reinstall all parts gently.

O que você precisa

  1. ionvac SmartClean V2 Side Brush Replacement, Side Brush: passo 1, imagem 1 %32 ionvac SmartClean V2 Side Brush Replacement, Side Brush: passo 1, imagem 2 %32

    • Caution: Before beginning, turn off the ionvac and place it on a level surface.

    • Flip your ionvac upside down so the wheels are pointed upwards and the side brushes are furthest from you.

    • Grasp the half-circle holding the brush into the bottom of your ionvac.

    Editar

  3. ionvac SmartClean V2 Side Brush Replacement: passo 2, imagem 1 %32

    • Gently pull on the brush head until it is released from the frame.

    • If the side brush is stuck, you can use a pry tool to pry it out.

    • Check out our Troubleshooting Page for cleaning instructions.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 4

Últimos 30 dias: 23

Duração total: 131