Ir para o conteúdo principal
Ajuda

Cricut Maker 3 Rubber Rollers Replacement

Tempo Estimado

  • Safety
  • Cricut Maker 3 Top Cover Replacement
  • 1 × iFixit Precision Bit Driver
  • 1 × PH2 Phillips Bit
  • 1 × 1/4-inch Ratchet
  • 1 × 1/4-inch Drive 4 mm Socket
  • 1 × Spudger
  • 1 × T8 Torx Bit
  • 1 × Needle Nose Pliers
  • 1 × Flathead 1.5 mm Screwdriver
  • 1 × Angled Tweezers
  • 1 × T8 Torx Security Bit Screwdriver
  • 1 × Heat Gun
  • 1 × Hair Dryer
  • 1 × Rubber Mallet
  • 1 × 7/16" Wrench
  • 1 × Paper Towels
  • 1 × Isopropyl Alcohol (90% or Greater)
  • 1 × Electrical Tape in 6 Assorted Colors
  • 1 × Damping Grease
  • 1 × White Lithium Grease
Adicionar

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.