Ir para o conteúdo principal
Ajuda

Drawer Track Alignment Spacer

Tempo Estimado

  • 1 × Phillips Screwdriver, general
  • 10 × machine washers
  • 1 × 3D printed universal drawer track spacerThe spacer is designed for use on either side. pick your required width: 1mm-6mm. One spacer can be used on either side for better drawer alignment and up to 12mm of gap adjustment
  • 1 × Flat head wood screwThe original drawer screw may not be long enough after the drawer track spacer is added. Use a longer equivalent size screw to account for the spacer if needed
Adicionar

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.