Introdução

The battery is quite simple to replace in a Roomba, and only requires removing the side brush and bottom plate before it can be accessed.

Peças

Não são necessárias peças.

  1. Place your Roomba upside-down on a hard surface.
    • Place your Roomba upside-down on a hard surface.

    If all you need off is the faceplate, skip all of the screwdriver-based steps, and just remove the dirt bin(step 7) and start from step 11 at the rear.

    David Forrest - Responder

  2. While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.
    • While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

    Adicionar comentário

    • Gently pull upwards on the brush to remove it.

    Adicionar comentário

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Rotate the Roomba upside-down so the bottom is facing towards you.

    Adicionar comentário

    • Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place.

    Adicionar comentário

    • Carefully lift the bottom plate.

    • The battery is only secured in place by the bottom plate, and may fall out once the bottom plate is removed.

    Adicionar comentário

    • Lift and remove the old battery by pulling the tabs on both sides.

    • Gently replace with a new battery.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

5 outras pessoas concluíram este guia.

Deborah Newberry

Member since: 23-01-2014

551 reputação

4 Guides authored

Equipe

Cal Poly, Team 13-14, Regan Winter 2014 Membro de Cal Poly, Team 13-14, Regan Winter 2014

CPSU-REGAN-W14S13G14

4 Membros

13 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 7

Últimos 30 dias: 44

Todo: 2,776