Ir para o conteúdo principal


Use this guide to remove or replace the two screws securing the iPhone XS display panel. These are the only screws on the exterior of the iPhone. They use a five-point design that is unique to Apple, requiring a specialty P2 pentalobe driver for removal.


Nenhum componente especificado.

  1. iPhone XS Pentalobe Screws Replacement, Pentalobe Screws: step 1, image 1 of 1
    • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Remove the two 6.9 mm-long pentalobe screws at the bottom edge of the iPhone.

    • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.


To reassemble your device, follow these instructions in reverse order.

9 outras pessoas concluíram este guia.

Jeff Suovanen

Membro desde: 06/08/2013

388.030 Reputação

260 Guias de autoria


iFixit Membro de iFixit


141 Membros

15.046 Guias de autoria

2 comentários

So you have not explained wether or not the iphone XS and the iphone X have identical pentalobe screws, what a guide it is, well infact i found out the hard way they are identical and replaceable with iphone x housing pentalobe screws, thanks.

Jonez K - Responder

On the screws what is the black stuff at the end of the screws? Because it came off my screws now I’m concerned that I have compromised the waterproof ness of my phone

Casey Hunter - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 8

Últimos 7 dias: 78

Últimos 30 dias: 296

Duração total: 8,103