Ir para o conteúdo principal

iLive IKBC384S FM/AM Antenna Replacement

O que você precisa

  1. iLive IKBC384S  FM/AM Antenna Replacement, Top Cover: passo 1, imagem 1 %32 iLive IKBC384S  FM/AM Antenna Replacement, Top Cover: passo 1, imagem 2 %32
    • Make sure you remove all seven 3 mm screws before proceeding to the next step.

  2. iLive IKBC384S  FM/AM Antenna Replacement: passo 2, imagem 1 %32 iLive IKBC384S  FM/AM Antenna Replacement: passo 2, imagem 2 %32
    • Use iOpener or heat gun on all sides except the front.

  3. iLive IKBC384S  FM/AM Antenna Replacement: passo 3, imagem 1 %32 iLive IKBC384S  FM/AM Antenna Replacement: passo 3, imagem 2 %32
    • Be cautious when taking the top of the device off there may still be some adhesive stuck to device.

    • The top of the device will be very difficult to remove because of the adhesive holding it together.

  4. iLive IKBC384S  FM/AM Antenna Replacement, FM/AM Antenna: passo 4, imagem 1 %32 iLive IKBC384S  FM/AM Antenna Replacement, FM/AM Antenna: passo 4, imagem 2 %32
    • Remove all four screws(13.5 mm in length) that are securing the disk drive.

  5. iLive IKBC384S  FM/AM Antenna Replacement: passo 5, imagem 1 %32 iLive IKBC384S  FM/AM Antenna Replacement: passo 5, imagem 2 %32
    • Unplug the ribbon cable connected to the motherboard that stems from the disc drive.

    • Also, disconnect the two power connectors from the motherboard.

    • Once you have removed the ribbon cables and two connectors on the motherboard the disk drive can be removed.

  6. iLive IKBC384S  FM/AM Antenna Replacement: passo 6, imagem 1 %32
    • After removing the top of the device, locate the screws on the motherboard. Gently unscrew all four of the 3.5mm screws on the motherboard.

  7. iLive IKBC384S  FM/AM Antenna Replacement: passo 7, imagem 1 %32 iLive IKBC384S  FM/AM Antenna Replacement: passo 7, imagem 2 %32
    • Desolder the antenna at the contact point.

    • Check out this awesome guide for soldering and desoldering tips.

  8. iLive IKBC384S  FM/AM Antenna Replacement: passo 8, imagem 1 %32 iLive IKBC384S  FM/AM Antenna Replacement: passo 8, imagem 2 %32
    • Place iOpener on antenna for approximately 5 minutes

  9. iLive IKBC384S  FM/AM Antenna Replacement: passo 9, imagem 1 %32
    • Lift up and remove all of the antenna.

    • The antenna will be glued down all the way around the radio

Conclusão

To reassemble your device, follow these instructions in reverse order.

Tracy Walts

Membro desde: 03/21/17

201 Reputação

Autoria de 2 guias

Equipe

Texas Tech, Team S46-G6, Bennett Spring 2017 Membro de Texas Tech, Team S46-G6, Bennett Spring 2017

TTU-BENNETT-S17S46G6

Membros da 3

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 678