Skip to main content
Help
Editando passo 2 —

Aviso: Você está editando um pré-requisito ao guia que você estava consultando. Quaisquer alterações que você faça afetarão todos os 12 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

In the following steps you must pull the antenna cable between the DS Lite game cartridge reader and motherboard. Pull slowly and stop when you feel resistance to avoid damaging the cable or motherboard.

Position the antenna cable with its connector facing up and away from the motherboard using a spudger to hold it down lightly in the gap between chips on the motherboard.

Slowly and carefully pull the antenna cable until the cable connector is under the DS Lite game cartridge reader.

Continue pulling the cable until the cable connector comes out from under the game cartridge reader on the right side.

When reassembling and attempting to feed the antenna cable back under the game cartridge reader, the cable may kink or become difficult to feed through. If so, try feeding a piece of thread through first; then, tie the thread to one end of the cable connector and pull it through, guiding it past any obstructions.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.