Conserte seus objetos Comunidade Loja
Ajuda

iMac 2009-2010 SSD Replacement

Editando passo 10 —
Adicione um título

Aviso: Você está editando um pré-requisito do guia que você estava consultando. Todas as alterações que você fizer afetarão todos os guias de 4 que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

If your motherboard has a socket for a hard drive temperature sensor, follow this step to plug the sensor wires in.

Find the connector on the motherboard labeled HD TMP or HDD TEMP.

If you have trouble locating it, trace the two-wire temperature cable you disconnected from the old hard drive.

If the previous temperature cable is still connected to the board here, disconnect and remove it. You will no longer need it.

Connect the temperature sensor's two-wire red-black cable to the motherboard plug labeled HD TMP or HDD TEMP.

The connector is keyed to fit in only one orientation. If it doesn't fit one way, rotate it 180° and try again.

Route the excess wire so it does not interfere with any other components.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.