Alterações no passo nº 6
Edição por Jeff Suovanen —
Edição aprovada por Jeff Suovanen
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* icon_note] If |
|---|---|
| + | [* icon_note] If your phone was fully submerged for any amount of time, it is likely some of the internal components [https://www.youtube.com/watch?v=DsDpALKQjUQ&feature=youtu.be&t=3m44s|corroded|new_window=true]. Corrosion looks like a white, chalky film covering metallic surfaces, and is especially prevalent on pins and connectors that carry current. Corrosion dissolves metals and will cause malfunctions in your phone. |
| [* black] Inspect the logic board and any connectors for [https://d3nevzfk7ii3be.cloudfront.net/igi/6RvY2lghPrJKoVZf|signs of corrosion|new_window=true], especially in areas where the LCIs are red. | |
| [* black] Check any external ports (charging port, headphone jack, SIM card slot, etc.) for corrosion as well. These may have to be cleaned out with alcohol and a brush, or replaced if cleaning is not practical. | |
| [* black] If all LCIs are white, and there is no moisture or corrosion, leave the phone disassembled in a warm, dry place for a day or two to make sure any potentially trapped liquid evaporates, then reassemble the phone. | |
| - | [* black] If any LCIs are red, there is corrosion or other liquid residue, the phone fell into dirty/acidic/sticky liquid, or you just want to be safe, continue for more thorough cleaning. |
| + | [* black] If any LCIs are red, if there is corrosion or other liquid residue, if the phone fell into dirty/acidic/sticky liquid, or if you just want to be safe, continue for more thorough cleaning. |