Conserte seus objetos Comunidade Loja

Alterações no passo nº 8

Edição por Arthur Shi —

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas do passo

[* black] Start to turn the tuning peg counter clockwise, and keep the half inch piece of string on top of the string which is being wound around the tuner.
-[* icon_note] The above step will stop the string from jumping over the tuner and make for a tighter string.
-[* icon_caution] Make sure that the string is laying on top of the tuner as seen in the picture to the right.
-[* icon_caution] Make sure that the string is still resting in both of the bridge notches (steps 5 & 6) as you tighten it.
+ [* icon_note] This will stop the string from jumping over the tuner and make for a tighter string.
+[* icon_note] Make sure that the string is laying on top of the tuner as seen in the picture.
+[* icon_note] Make sure that the string is still resting in both of the bridge notches (steps 5 & 6) as you tighten it.