Alterações no passo nº 8
Edição por Ani Svadjian —
Edição aprovada por Arthur Shi
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Start to turn the tuning peg counter clockwise, and keep the half inch piece of string on top of the string which is being wound around the tuner. This will stop the string from jumping over the tuner and make for a tighter string. Make sure that the string is laying over the top of the tuner as seen in the picture. |
|---|---|
| - | [* black] Also, as the string gets tighter, watch to make sure that the string is still resting in both of the bridge notches (steps 5 & 6). |
| + | [* black] Start to turn the tuning peg counter clockwise, and keep the half inch piece of string on top of the string which is being wound around the tuner. |
| + | [* icon_note] The above step will stop the string from jumping over the tuner and make for a tighter string. |
| + | [* icon_caution] Make sure that the string is laying on top of the tuner as seen in the picture to the right. |
| + | [* icon_caution] Make sure that the string is still resting in both of the bridge notches (steps 5 & 6) as you tighten it. |