Ir para o conteúdo principal

Alterações no passo #12

Edição por CChin

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas de Passo

[* black] IC Identifications, pt. 3:
[* red] NXP Semiconductor [link|https://www.nxp.com/products/interfaces/ic-spi-serial-interface-devices/ic-bus-controller-and-bridge-ics/ultra-low-voltage-translating-24-bit-fm-plus-ic-bus-smbus-i-o-expander:PCAL6524|PCAL6524] 24-bit I/O expander
[* orange] ON Semiconductor FPF3688UCX load switch (likely)
[* yellow] ON Semiconductor [link|https://www.onsemi.com/products/power-management/dc-dc-controllers-converters-regulators/converters/fan48630|FAN48630UC35X] 1.5 A synchronous regulator
[* green] Vishay [link|https://www.vishay.com/ppg?67786|DG2730] 2 port, 480 Mbps DPDT USB 2.0 analog switch
[* light_blue] NXP Semiconductor [link|https://www.nxp.com/products/peripherals-and-logic/signal-chain/comparators/low-voltage-comparator:NCX2200|NCX2200] comparator
[* blue] Probably an ON Semiconductor analog switch
[* violet] Probably some low/mid-band front-end modules

Imagem 1

Nenhuma imagem anterior

Adicionado

Imagem 2

Nenhuma imagem anterior

Adicionado