Alterações neste passo
Edição por Phillip Takahashi —
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [* black] Use two pipe wrenches to separate the pipes. Place one wrench on the joint and hold it steady. Use the second wrench to turn the top pipe counter-clockwise until it fully unthreads. Use at least one other person to hold and stabilize the top pipe. |
|---|---|
| + | [* icon_note] Be sure that the pipe wrench's open ends are facing the direction of rotation. |
| + | [* icon_note] You may wish to use something to block the water that will spray out when separating pipes with water in them. |
Imagem 1
Nenhuma imagem anterior
Adicionado