Alterações no passo nº 12
Edição por Jeff Suovanen —
Edição aprovada por Jeff Suovanen
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Though things are [https://media.giphy.com/media/nrXif9YExO9EI/giphy.gif|heating up|new_window=true] in the teardown room as we get closer to finishing this Xbox dissection, we can't extract the "Thermal System" just yet. Instead, we lift the whole motherboard out of the metal casing. |
|---|---|
| - | [* black] A bracket on the bottom of the motherboard holds the fan/heat sink assembly in place. Spring clips caused us some annoyance, but we managed to wrestle the bracket free. |
| + | [* black] Things are [https://media.giphy.com/media/nrXif9YExO9EI/giphy.gif|heating up|new_window=true] in the teardown room, but we can't extract the "Thermal System" just yet. Instead, we lift the whole motherboard out of the metal casing. |
| + | [* icon_note] An X-shaped bracket secures the heat sink to the motherboard—a signature part we've seen in every Xbox since the [guide|3341|original 360|stepid=16056]. |
| + | [* black] Spring clips caused us some annoyance, but we managed to wrestle the bracket free. |