Alterações no passo nº 1
Edição por IXQsystemsinc —
Edição aprovada por Kyle Smith
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* icon_note] Make sure your |
|---|---|
| - | [* black] Hold the |
| + | [* icon_note] Make sure your DigiLand is turned off. If DigiLand is on, turn it off. |
| + | [* black] Hold the DigiLand firmly, in landscape view. |
| [* black] Locate the crevice that separates the front cover from the back cover. Then hold the plastic opening tool and insert the wedge portion of the tool into the crevice. | |
| [* icon_note] Some force may need to be applied and there may be a cracking sound. This is normal. | |
| [* black] Slowly slide the wedge portion of the plastic opening tool while applying some upward force around the device until the back cover is completely loose. | |
| + | [* icon_note] Be gentle, else screen will crack. |