Alterações neste passo
Edição por Jeff Suovanen —
Edição aprovada por Jeff Suovanen
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Remove the Lightning connector flex cable. | |
| + | [* icon_reminder] Before installing or replacing the Lightning connector flex cable assembly: |
| + | [* black] Use a plastic tool to scour any bits of adhesive residue from the rear case behind the cable. |
| + | [* black] Compare your replacement part to the original and note any differences. You may find a rubber gasket adhered to the old headphone jack, which should be transferred to the new part if needed. |
| + | [* black] Test fit your replacement part, and then peel off any protective plastic films or liners before installing. |