Alterações no passo nº 10
Edição por Arthur Shi —
Edição aprovada por Arthur Shi
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Use the pointed tip of a spudger to nudge the 3.5 mm headphone jack from its housing in the rear case. |
|---|---|
| + | [* black] Insert the point of a spudger into the headphone jack and wiggle it slightly to loosen the headphone jack from the bottom edge of the case. |
| + | [* black] If your replacement part did not come with a [https://d3nevzfk7ii3be.cloudfront.net/igi/XBrYVHBxXx3UmHMn|headphone jack gasket|new_window=true], use tweezers to remove the gasket from the old part and transfer it to the replacement part. |
| + | [* icon_reminder] Before re-installation, use a spudger to scour any remaining adhesive residue from the rear case. You can use high concentration isopropyl alcohol to help with the process. |