Conserte seus objetos Comunidade Loja

Alterações no passo nº 10

Edição por Arthur Shi —

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Insert the point of a spudger into the headphone jack and wiggle it slightly to loosen the headphone jack from the bottom edge of the case.
-[* black] If your replacement part did not come with a [https://d3nevzfk7ii3be.cloudfront.net/igi/XBrYVHBxXx3UmHMn|headphone jack gasket|new_window=true], use tweezers to remove the gasket from the old part and transfer it to the replacement part.
+[* black] Remove the Lightning connector assembly.
+[* icon_note] If your replacement part did not come with a [https://d3nevzfk7ii3be.cloudfront.net/igi/XBrYVHBxXx3UmHMn|headphone jack gasket|new_window=true], use tweezers to remove the gasket from the old part and transfer it to the replacement part.
[* icon_reminder] Before re-installation, use a spudger to scour any remaining adhesive residue from the rear case. You can use high concentration isopropyl alcohol to help with the process.