Alterações no passo nº 2
Edição por Jeff Suovanen —
Edição aprovada por Jeff Suovanen
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Use a plastic opening tool to separate the screen from the device. | |
| [* black] Start in the top right corner of the device for best results. | |
| [* black] Carefully insert opening picks between the screen and the device to prevent the glue from re-adhering. | |
| + | [* icon_caution] The wi-fi antennas are glued under the screen border along the top edge (on either side of the camera), and can be damaged easily. Use extra care when separating the top edge, and apply more heat if necessary. |