Alterações no passo nº 7
Edição por Starfire 213 —
Edição aprovada por Kyle Smith
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* icon_caution] There's a trackpad and keyboard ribbon connecting the upper case to the logic board, so don't pull the upper case off entirely just yet. | |
| [* black] Starting near the display and working around to the front of the computer, pry up on the upper case. A [product|IF145-000|plastic opening tool] or a medium hard guitar pick may help you to do this. | |
| [* icon_note] The upper case is likely to stick at the connection above the optical drive. If this is the case, first free all other sides, then proceed to pull upward on the upper case from either side of the optical drive opening. | |
| [* icon_note] If you stand the base on end to get a better look you may displace the total of 4 grey plastic clips that hold the keyboard in place. Don't panic. They slide into slots at the top right-most edge near the CD drive. | |
| + | [* black] For Reassembly, make sure that the clips for the right side click into place, they are different from the left side |