Alterações no passo nº 14
Edição por Arthur Shi —
Edição aprovada por Arthur Shi
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* red] Switch on your multimeter, and set the dial to resistance mode. | |
| [* icon_note] Resistance is measured in ohms, indicated by the ***Ω*** symbol. | |
| - | [* icon_note] The iFixit multimeter is autoranging, meaning it will automatically determine the best measuring range. If your multimeter is manual ranging, you will need to set the correct range for the resistance you expect to measure. If you're not sure, start with the highest setting. |
| + | [* icon_note] The iFixit multimeter is auto-ranging, meaning it will automatically determine the best measuring range. |
| + | [* icon_note] If your multimeter is manual ranging, you will need to set the correct range for the resistance you expect to measure. If you're not sure, start with the highest setting. |