Conserte seus objetos Comunidade Loja

Alterações no passo nº 4

Edição por Arthur Shi —

Edição aprovada por Arthur Shi

Antes
Depois
Sem alteração

Linhas do passo

-[* black] The multimeter tests continuity by sending a little current through one probe, and checking whether the other probe receives it.
- [* black] If the probes are connected—either by a continuous circuit, or by touching each other directly—the test current flows through. The screen displays a value of zero (or near zero), and the multimeter ***beeps***. Continuity!
- [* black] If the test current isn't detected, it means there's no continuity. The screen will display 1 or OL (open loop).
+[* icon_note] The multimeter tests continuity by sending a little current through one probe, and checking whether the other probe receives it.
+ [* icon_note] If the probes are connected—either by a continuous circuit, or by touching each other directly—the test current flows through. The screen displays a value of zero (or near zero), and the multimeter ***beeps***. Continuity!
+ [* icon_note] If the test current isn't detected, it means there's no continuity. The screen will display 1 or OL (open loop).