Conserte seus objetos Comunidade Loja

Alterações no passo nº 3

Edição por Jeff Suovanen —

Edição aprovada por Jeff Suovanen

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Pull the innermost tab evenly straight up.
-[* icon_caution] Do not twist the tab; try to keep the adhesive strip as flat and wide as possible. When the adhesive bunches up it tends to tear.
-[* icon_caution] Be sure you do not pull the tab against any of the components of the phone, they may puncture the adhesive and cause the strip to tear.
+[* icon_caution] Try to keep the strips flat and unwrinkled during this procedure; wrinkled strips will stick together and break instead of pulling out cleanly.
+[* black] Slowly pull one of the battery adhesive strips away from the battery, toward the bottom of the iPhone.
+[* black] Pull steadily, maintaining constant tension on the strip as it slips out from between the battery and the rear case. For best results, pull the strip at a 60º angle or less.