Alterações no passo nº 6
Edição por Arthur Shi —
Edição aprovada por Arthur Shi
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Remove the following screws from the logic board: | |
| [* red] One 2.4 mm Phillips #000 screw | |
| [* icon_reminder] This screw also holds a small metal contact beneath the logic board. It's held in place underneath a plastic bracket, but if you see it slipping out, refer to [guide|20246|this step|stepid=72613|new_window=true] to remove it. | |
| [* orange] Two 2.3 mm Phillips #000 screws | |
| [* yellow] Four 2.8 mm standoff screws | |
| - | [* icon_note] Standoff screws are best removed using |
| + | [* icon_note] Standoff screws are best removed using a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit. |
| [* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components. |