Alterações no passo nº 1
Edição por Kyle Smith —
Edição aprovada por Kyle Smith
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Run the tip of a spudger between the battery and the headphone jack to unfold the battery adhesive tab. | |
| - | [* icon_caution] Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool. |
| [* icon_caution] Do not pry against the logic board or you may damage the phone. | |
| [* icon_caution] Avoid prying at the top left near the volume controls, or you may damage the [https://d3nevzfk7ii3be.cloudfront.net/igi/uWEVFdCRurTInQuC|volume button ribbon cable|new_window=true]. | |
| [* icon_note] For more alternative methods if either of the adhesive strips broke off underneath the battery and could not be retrieved, ***refer to step 27***. |