Histórico do passo nº 1 do guia How to replace the battery in your iPhone 5s - iFixit

Alterações no passo nº 1

Edição por Kyle Smith — 19 de mar de 2021

Edição aprovada por Kyle Smith

: Antes
: Depois
: Sem alteração

Linhas do passo

	[* black] Run the tip of a spudger between the battery and the headphone jack to unfold the battery adhesive tab.
-	[* icon_note] If the adhesive breaks off underneath the battery and can't be retrieved, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery in the area of the broken adhesive strip(s).
-	[* black] Wait about one minute for the alcohol solution to weaken the adhesive. Use the flat end of a spudger to gently lift the battery.
-	[* icon_caution] Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.
-	[* icon_caution] Do not pry against the logic board or you may damage the phone.
-	[* icon_caution] Avoid prying at the top left near the volume controls, or you may damage the [https://d3nevzfk7ii3be.cloudfront.net/igi/uWEVFdCRurTInQuC\|volume button ribbon cable\|new_window=true].
+	[* black] Wait about one minute for the alcohol solution to weaken the adhesive. Use the flat end of a spudger to gently lift the battery.
+	[* icon_caution] Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.
+	[* icon_caution] Do not pry against the logic board or you may damage the phone.
+	[* icon_caution] Avoid prying at the top left near the volume controls, or you may damage the [https://d3nevzfk7ii3be.cloudfront.net/igi/uWEVFdCRurTInQuC\|volume button ribbon cable\|new_window=true].
	[* icon_note] For more alternative methods if either of the adhesive strips broke off underneath the battery and could not be retrieved, *refer to step 27*.