Alterações no passo nº 1
Edição por Kyle Smith —
Edição aprovada por Kyle Smith
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Run the tip of a spudger between the battery and the headphone jack to unfold the battery adhesive tab. | |
| - | [* black] Important: Apply heat to the bottom of the iPhone case using an iOpener or similar heating pad to soften up the battery adhesive strips and make them more flexible, otherwise they will probably break when you pull on them. |
| + | [* black] Apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery to soften up the battery adhesive strips. |
| + | [* icon_note] Alternatively: Apply heat to the bottom of the iPhone case using an iOpener or similar heating pad to soften up the battery adhesive strips and make them more flexible, otherwise they will probably break when you pull on them. |