Conserte seus objetos Comunidade Loja

Alterações no passo nº 1

Edição por Sam —

Edição aprovada por Sam

Antes
Depois
Sem alteração

Linhas do passo

[* black] Flip the skateboard back over.
-[* red] Remove the 6 bolts indicated on the top side of the skateboard with a 3mm allen wrench.
-[* orange] While holding the nut from the underside of the skateboard remove the 4 (length) bolts with the 3mm allen.
+[* red] Remove the 6 22mm bolts indicated on the top side of the skateboard with a 3mm allen wrench.
+[* orange] While holding the nut from the underside of the skateboard remove the 4 32mm bolts with the 3mm allen wrench.
[* black] After removing these bolts, you can remove the trucks and control module from the board.