Alterações no passo nº 5
Edição por Arthur Shi —
Edição aprovada por Arthur Shi
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Slowly feed solder wire into the wire strands. If the strands reach the proper temperature, they will readily wick the molten solder. |
|---|---|
| + | [title] Apply solder wire |
| + | [* black] Slowly feed solder wire into the wire strands. The wire strands should readily absorb the molten solder. |
| [* icon_note] If the solder pools on top of the wire strands, the strands aren't hot enough to melt the solder. Try moving the soldering iron so that the tip touches more of the strands. | |
| - | [* black] Once the molten solder saturates the wire strands, allow the solder to cool down and solidify (2-3 minutes). |
| + | [* black] Feed solder wire along the exposed wire until everything is thinly coated. |
| + | [* black] Once the molten solder saturates the wire strands, allow the solder joint to cool down and solidify (2-3 minutes). |