Alterações no passo nº 5
Edição por Arthur Shi —
Edição aprovada por Arthur Shi
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] In careful increments, add a millimeter of new solder wire from the top of the existing wires until the entire wire reaches a shiny silver color. |
|---|---|
| - | [* black] Next, turn off the soldering gun and allow the solder to cool down and solidify (approximately five minutes). |
| + | [* black] Slowly feed solder wire into the wire strands. If the strands reach the proper temperature, they will readily wick the molten solder. |
| + | [* icon_note] If the solder pools on top of the wire strands, the strands aren't hot enough to melt the solder. Try moving the soldering iron so that the tip touches more of the strands. |
| + | [* black] Once the molten solder saturates the wire strands, allow the solder to cool down and solidify (2-3 minutes). |