Alterações no passo nº 3
Edição por Arthur Shi —
Edição aprovada por Arthur Shi
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* red] Select your new hard drive from the left column in Disk Utility. | |
| [* icon_note] If the new drive is not showing up, disconnect the enclosure and check if the hard drive is properly connected to the enclosure. | |
| [* orange] Select the ***Erase*** option near the top row of buttons. | |
| - | [* black] Select a name for your new drive, and select ***" |
| + | [* black] Select a name for your new drive, and select ***"APFS"*** for the format. |
| [* icon_caution] ***Warning:*** Pressing the erase button will erase the entire contents of the drive. Make sure you have selected the new hard drive! | |
| [* black] Press the ***erase*** button. | |
| [* icon_note] This process may take up to 10 minutes, so be patient. | |
| [* black] Quit Disk Utility once the erase is complete. |