Alterações no passo nº 3
Edição por Arthur Shi —
Edição aprovada por Arthur Shi
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Test the sensors | |
| - | [* black] Use a spudger or your finger to firmly press the top of a sensor. You should hear a loud click, signifying that the |
| + | [* black] Use a spudger or your finger to firmly press the top of a sensor. You should hear a loud click, signifying that the metal strips in the sensor are flexing properly. |
| [* black] Repeat for the second sensor. | |
| - | [* black] If you don't hear a click, the contacts may be fused together, or the |
| + | [* black] If you don't hear a click, the contacts may be fused together, or the metal spring is worn out. If the sensor's worn, you'll need to replace the sensor. |