Alterações no passo nº 8
Edição por Arthur Shi —
Edição aprovada por Arthur Shi
- Antes
- Depois
- Sem alteração
Linhas do passo
| + | [title] Clean the sensor contacts |
|---|---|
| [* black] If your tests suggest that you may have dirty contacts, or you suspect the contacts have fused, follow the next steps to remove the sensors to clean them. | |
| [* red] Use a Phillips screwdriver to remove the screw securing the sensors to the Instant Pot. | |
| [* icon_note] This screw can be very tight, because the heat from the Instant Pot transfers through it. Be sure to use the right sized screwdriver to avoid stripping it. | |
| [* black] Lift the sensor assembly out of its recess. |