Histórico do passo nº 8 do guia Penguin FZ-8 28” Tower Fan Blade Replacement

Alterações no passo nº 8

Edição por Justin Ogihara — 14 de jun de 2021

Edição aprovada por Justin Ogihara

-	[* red] Remove the two screws holding the fan blade in place~~. At this point~~ the ~~fan blade can be completely taken out of the fan case~~. ~~The size of the screws are 5mm.~~
+	[* red] Remove the two 5 mm screws holding the fan blade in place using the Phillips #1 screwdriver.