Alterações no passo nº 4
Edição por Justin Ogihara —
Edição aprovada por Justin Ogihara
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Place a screw with a washer attached into a hole and tighten it with the Allen wrench. Make sure the screws are on tight by using the short end of the Allen wrench on the head of the screw. Repeat this process for the other 5 screws and washers. |
|---|---|
| + | [* black] Place a screw with a washer attached into a hole and tighten it with the Allen wrench. Make sure the screws are on tight by using the short end of the Allen wrench on the head of the screw. |
| + | [* black] Repeat this process for the other 5 screws and washers. |