Alterações no passo nº 2
Edição por Arthur Shi —
Edição aprovada por Arthur Shi
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Turn the screen assembly over and insert an opening pick in between the LCD panel and the digitizer at the top-left corner. |
|---|---|
| - | [* icon_note] You can slightly bend the digitizer to create a wider gap, but take care not to bend it to far to cause damage to the digitizer. |
| - | [* black] Begin sliding the opening pick along the top edge of the screen assembly to slice the adhesive. |
| + | [* black] Turn the screen assembly over. |
| + | [* black] Insert an opening pick in between the LCD panel and the digitizer at the top-left corner. |
| + | [* icon_note] You can slightly bend the digitizer to create a wider gap, but take care not to bend it too far to cause damage to the digitizer. |
| + | [* black] Slide the opening pick along the top edge of the screen assembly to slice the adhesive. |