Conserte seus objetos Comunidade Loja

Alterações no passo nº 2

Edição por Justin Ogihara —

Edição aprovada por Justin Ogihara

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Now remove the screws along the outer edge of the pickguard. Be careful not to get them mixed up with the screws on the selector switch or the pickups. Once removing all the screws from just the edge if the pickguard, the pickguard will become loose.
-[* black] Be careful not to pull the pickguard completely off the guitar, because all of the wiring is still connected to the pickups, knobs, and switch.
+[* black] Remove the screws along the outer edge of the pickguard. Once removing all the screws from just the edge if the pickguard, the pickguard will become loose.
+[* icon_note] Be careful not to pull the pickguard completely off the guitar, because all of the wiring is still connected to the pickups, knobs, and switch.