Alterações no passo nº 4
Edição por Claire Miesch —
Edição aprovada por Claire Miesch
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Place the edge of a curved blade into the thin gap between the display and the outer case. Start at the short side of the display, closest to the digital crown. | |
| [* black] Press firmly ''straight down'' into the gap. | |
| [* black] Once inserted, tilt the blade to pry the display open slightly. | |
| - | [* icon_caution] Do not insert the knife more than 1/16th of an inch (~2 mm) to avoid damaging the |
| + | [* icon_caution] Do not insert the knife more than 1/16th of an inch (~2 mm) to avoid damaging the Force Touch sensor. |