Alterações no passo nº 7
Edição por Ella Leininger —
Edição aprovada por Taylor Dixon
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Apply Liquid Electrical Tape | |
| - | [* black] Apply a layer of liquid electrical tape to the board (a coffee stir stick is a good applicator). Ensure that you do not cover the sensor itself, as it needs to be exposed in order to measure pressure. After every layer, wait at least ten minutes before applying another one. Very carefully visually inspect to ensure total coverage. |
| + | [* black] Apply a layer of liquid electrical tape to the board (a coffee stir stick is a good applicator). |
| + | [* black] After every layer, wait at least ten minutes before applying another one. Very carefully visually inspect to ensure total coverage. |
| + | [* icon_caution] Ensure that you do not cover the sensor itself, as it needs to be exposed in order to measure pressure. |