Alterações no passo nº 1
Edição por Ashley Revis —
Edição aprovada por Ashley Revis
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* red] Locate the 6 screws on the outer ring of the back of the fan holding the frame together. |
|---|---|
| - | [* black] Using a Phillips head screwdriver, remove the 6 screws. |
| + | [* black] Using a Phillips head screwdriver, remove the 6 screws on the outer ring of the back of the fan holding the frame together. |
| [* icon_note] The screw channel is long and it is recommended to use a screwdriver with a long shaft or a screwdriver with a skinnier handle. |