Alterações no passo nº 7
Edição por Taylor Dixon —
Edição aprovada por Taylor Dixon
- Antes
- Depois
- Sem alteração
Linhas do passo
| [* black] Thread the screen cable and digitizer cable out of their cutouts. | |
| [* black] Remove the screen. | |
| - | [* |
| + | [* icon_reminder] To install a replacement screen: |
| [* black] Clean all adhesive residue from the phone frame. Adhesive that's left behind may apply uneven pressure against the replacement screen and potentially damage it. | |
| [* black] Apply a pre-cut adhesive, or double-sided tape to the phone frame's perimeter. | |
| [* black] Peel all plastic liners from the back of the replacement screen to expose the adhesive. | |
| [* black] Carefully thread the screen cable and the digitizer cable through the phone frame's cutouts. | |
| [* black] Lay the screen onto the frame and place some books on top for an hour to help the screen adhesive bond to the frame. |