Alterações no passo nº 3
Edição por Taylor Dixon —
Edição aprovada por Taylor Dixon
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* icon_note] The loudspeaker is still held in place by a strong adhesive gasket. |
|---|---|
| + | [* icon_note] The loudspeaker is still held in place by a strong adhesive gasket. Before attempting to remove it, pry it up in a few different places as shown in the following steps to break the adhesive seal. |
| [* black] Insert the point of a spudger under the bottom right corner of the loudspeaker. | |
| [* black] Pry up to loosen the loudspeaker from the phone. |