Alterações no passo nº 1
Edição por Jeff Suovanen —
Edição aprovada por Jeff Suovanen
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Before you begin, it's a good idea to test-fit your new battery in the iPhone |
|---|---|
| + | [* black] Before you begin, it's a good idea to test-fit your new battery in the iPhone. |
| [* icon_note] This works best after reinstalling the speaker and Taptic Engine. Refer to the guide you used to remove your old battery. | |
| [* icon_reminder] Make sure the battery connector lines up correctly with its socket on the logic board. | |
| [* icon_caution] Be careful not to touch the Face ID camera and sensor hardware along the top edge of the iPhone (the "notch" area). |