Histórico do passo nº 10 do guia Right Joy-Con Joystick Replacement - iFixit

Alterações no passo nº 10

Edição por Arthur Shi — 25 de mai de 2021

Edição aprovada por Arthur Shi

: Antes
: Depois
: Sem alteração

Linhas do passo

-	[title] ~~Disconnecting~~ the midframe
+	[title] Disconnect the midframe
	[* black] The ZR button cable is locked in place by a small [guide\|25629\|ZIF connector\|stepid=64969\|new_window=true] on the motherboard. Use tweezers or a spudger to flip up the ZIF connector lock.
	[* black] Use tweezers to gently pull the ZR button flex cable out of the ZIF connector socket. The midframe is now disconnected and can be removed.
-	[* icon_note] ++The ZR button cable in this Joy-Con is short and can be tricky to reconnect. *If you are worried about not being able to reconnect it, you can skip this step and leave it connected, which we recommend.+*+'
+	[* icon_note] The ZR button cable in this Joy-Con is short and can be tricky to reconnect. *If you are worried about not being able to reconnect it, you can skip this step and leave it connected, which we recommend.*
	[* black] If you choose to leave the cable connected, *be careful.* Work slowly and do your best to keep the midframe from moving around as you perform the last few steps to avoid damaging the cable.