Conserte seus objetos Comunidade Loja

Alterações no passo nº 2

Edição por Taylor Dixon —

Edição aprovada por Taylor Dixon

Antes
Depois
Sem alteração

Linhas do passo

-[* black] Insert an Opening Pick under the lower side of the back panel (opposite the R and ZR buttons).
+[* black] Insert an opening pick under the lower side of the back panel (opposite the R and ZR buttons).
[* black] Slide the flat edge of an opening pick up the side of the Joy-Con.
-[* icon_note] Be careful not to slide the Opening Pick too far inside the Joy-Con. This may damage the inner components. The back panel loosens fairly easily, so not much pressure is needed.
+[* icon_note] Be careful not to slide the opening pick too far inside the Joy-Con. This may damage the inner components. The back panel loosens fairly easily, so not much pressure is needed.