Conserte seus objetos Comunidade Loja

Alterações no passo nº 2

Edição por Taylor Dixon —

Edição aprovada por Taylor Dixon

Antes
Depois
Sem alteração

Linhas do passo

-[* black] ***Insert an Opening Pick under the lower side of the back panel ***(opposite from the R and ZR buttons).
-[* black] ***Slowly slide the Opening Pick along the left side of the back panel.***
-[* icon_caution] Be careful not to slide the Opening Pick too far inside the Joy-Con. This may damage the inner components. The back panel loosens fairly easily, so not much pressure is needed.
+[* black] Insert an Opening Pick under the lower side of the back panel (opposite the R and ZR buttons).
+[* black] Slide the flat edge of an opening pick up the side of the Joy-Con.
+[* icon_note] Be careful not to slide the Opening Pick too far inside the Joy-Con. This may damage the inner components. The back panel loosens fairly easily, so not much pressure is needed.