Alterações no passo nº 6
Edição por Taylor Dixon —
Edição aprovada por Taylor Dixon
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* icon_note] Before you perform this step, take note of how the |
|---|---|
| + | [* icon_note] Before you perform this step, take note of how the antenna cable and its PCB board are seated for proper reassembly later. |
| [* black] Carefully de-thread the upper half of the grey antenna cable out of the battery cavity | |
| [* black] Pry up with the pointy end of a Spudger to disconnect the antenna cable's [guide|25629|coaxial connector|stepid=64973] from the motherboard. | |
| [* black] Remove the grey antenna cable. | |
| - | [* icon_reminder] During reassembly, reconnect the antenna cable then make sure it is routed through the battery cavity in the midframe as it was before you took it out. |
| + | [* icon_reminder] During reassembly, reconnect the antenna cable, then make sure it is routed through the battery cavity in the midframe as it was before you took it out. |