Conserte seus objetos Comunidade Loja

Alterações no passo nº 4

Edição por Taylor Dixon —

Edição aprovada por Taylor Dixon

Antes
Depois
Sem alteração

Linhas do passo

[* black] Use a spudger to gently pry the battery connector from its socket on the motherboard. This will keep the Joy-Con from powering on during the repair.
- [* icon_caution] Use caution while working around the IR sensor cable and vibration motor cable that run close to the battery connector.
+ [* icon_caution] Be extremely careful while you pry up the battery connector. If it does not come up easily, try gently pulling on the wires to disconnect it.